Items where Subject is "Engineering"

Article

A., Anvari (2019) Application of plasma technology in aerospace vehicles: A review. Journal of Engineering and Technology Research, 11 (2). pp. 12-28. ISSN 2006-9790

Adeoti, Guy Oyéniran and Agbelele, Judicaël Koffi and Yabi, Crespin Prudence and Kinhoun, Rufin Nongnidé and Alamou, Éric Adéchina (2023) Critical Assessment of Slope Stability: A Case Study on the Toffo-Lalo Road Project. Modern Mechanical Engineering, 13 (04). pp. 77-100. ISSN 2164-0165

Amadi, Hachimenum N. and Awochi, Oke. I. and Innocent, Abam. S. (2024) Long-term Load Forecasting for Optimal Power System Planning and Decision-Making. Journal of Engineering Research and Reports, 26 (4). pp. 1-10. ISSN 2582-2926

Anthony, J. Taplah and Delfin, C. Suministrado and Rossanna, Marie C. Amongo and Fernando, O. Paras Jr and Jessie, C. Elauria and Marilyn, Elauria (2018) Development of hot spring fed incubator for duck eggs. Journal of Engineering and Technology Research, 10 (3). pp. 19-25. ISSN 2006-9790

Aslam, Farhan (2023) Advancing Intelligence: Unveiling the Power of Advanced Machine Learning Algorithms for Real-World Applications. Journal of Engineering Research and Reports, 25 (7). pp. 159-165. ISSN 2582-2926

Azamatovich, Obidov Avazbek and O’g’li, A.J.B. and Akramovich, Qosimov Axtam (2023) Determining the Optimal Parameters of an Advanced Linter Machine. Engineering, 15 (12). pp. 810-820. ISSN 1947-3931

Belalo, Lester Joseph T. and Maming, Maiden Grace R. (2021) Capacity Improvement for Transfer Molding Trough Reduction of Mold Curing Time. Journal of Engineering Research and Reports, 20 (2). pp. 125-141. ISSN 2582-2926

Chidiebere, Olughu O. and Inyang, Uwem E. and Oboh, Innocent O. (2023) Modelling and Optimization of Natural Gas Dehydration System Using Triethylene Glycol. Journal of Engineering Research and Reports, 24 (12). pp. 89-102. ISSN 2582-2926

Dessena, Gabriele and Ignatyev, Dmitry I. and Whidborne, James F. and Pontillo, Alessandro and Zanotti Fragonara, Luca (2022) Ground Vibration Testing of a Flexible Wing: A Benchmark and Case Study. Aerospace, 9 (8). p. 438. ISSN 2226-4310

E., Udegbe V. and E., Amah V. and E., Ugwoha (2023) Modelling Safety Behaviour from Safety Climate among Healthcare Workers in Benin City. Journal of Engineering Research and Reports, 25 (12). pp. 98-109. ISSN 2582-2926

Gaidai, Oleg and Yan, Ping and Xing, Yihan (2022) Prediction of extreme cargo ship panel stresses by using deconvolution. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Jampana, Venkata N. Raju and Ramana Rao, P. S. V. and Sampathkumar, A. and Chelladurai, Samson Jerold Samuel (2021) Experimental and Thermal Investigation on Powder Mixed EDM Using FEM and Artificial Neural Networks. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Kalangi, Chaitanya and Bolleddu, Venkateshwarlu and Allasi, Haiter Lenin and Khan M, Adam (2021) Tribological Characteristics of Carbon Nanotubes-Reinforced Plasma-Sprayed Al2O3-TiO2 Ceramic Coatings. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Lei, Junqi and Wang, Wen and Yang, Kun and Zhang, Tong and Guo, Runsheng and Yu, Yihe (2023) Experimental Study on the Attenuation Law of Vibration Wave Propagation in Natural Gas Wells in Coal-Gas Cross-Mining Area. World Journal of Engineering and Technology, 11 (04). pp. 775-792. ISSN 2331-4222

Li, Huadong and Li, Daochun and Shen, Tong and Bie, Dawei and Kan, Zi (2022) Numerical Analysis on the Aerodynamic Characteristics of an X-wing Flapping Vehicle with Various Tails. Aerospace, 9 (8). p. 440. ISSN 2226-4310

Li, Xu and Zhou, Zhou (2022) Aerodynamic Modelling of the Airfoil Immersed in Two-Dimensional Jet Flow. Aerospace, 9 (6). p. 291. ISSN 2226-4310

Li, Zhixin and Xu, Kaidong and Peng, Jiahui and Wang, Jina and Zhang, Jianwu and Li, Qingxiao and Kara, Fuat (2021) Influence of the Heating Temperature and Fineness on the Hydration and Mechanical Property of Recycled Gypsum Plaster. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Lin, Ming-Jong (2023) Research the Instrument of Karl Fischer Titration How to Detect the Moisture Content from Transformer Insulating Oil. Journal of Engineering Research and Reports, 24 (8). pp. 46-51. ISSN 2582-2926

Liu, Shuangxi and Yan, Binbin and Zhang, Xu and Liu, Wei and Yan, Jie (2022) Fractional-Order Sliding Mode Guidance Law for Intercepting Hypersonic Vehicles. Aerospace, 9 (2). p. 53. ISSN 2226-4310

McAllister, Sara (2019) The Role of Fuel Bed Geometry and Wind on the Burning Rate of Porous Fuels. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Michael, Odineze C. and Odigure, Joseph O. and Mohammed, Alhassan and Abdulkareem, Ambali S. (2024) Characterization of Mixed Amine Functionalized Carbon Nanotube from Nigerian Sub Bituminous Coal. Journal of Engineering Research and Reports, 26 (6). pp. 319-326. ISSN 2582-2926

Moawad, Youssef and Vanderbauwhede, Wim and Steijl, René (2022) Investigating hardware acceleration for simulation of CFD quantum circuits. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Naik, Jajati Keshari and Bagal, Dilip Kumar and Muduli, Pradyut Kumar (2023) A study of the shear strength properties of expansive soil treated with fly ash admixture. Engineering Solid Mechanics, 12 (1). pp. 41-50. ISSN 22918744

Nirmi, Hajraoui and N., Raissouni (2019) Fast transmission of image, reduction of energy consumption and lifetime extension in wireless cameras networks. Journal of Engineering and Technology Research, 11 (1). pp. 1-11. ISSN 2006-9790

Obiko, J.O. and Chow, L.H. and Whitefield, D.J. and Bodunrin, M.O. (2023) Hot workability characteristics of two A335 P92 steels for power plant application: A comparative study. Engineering Solid Mechanics, 11 (3). pp. 311-324. ISSN 22918744

Olatunji, O. M. and Horsfall, I. T. and Ekiyor, T. H. (2018) Comparison of bioremediation capabilities of poultry droppings and avocado pear seed cake in petroleum polluted soil. Journal of Engineering and Technology Research, 10 (5). pp. 38-45. ISSN 2006-9790

Olowokere, J.A and Odineze, C.M (2024) Investigating the Thermal Characteristics and Water Absorption Capacity of Post-consumer Recycled Low Density Polyethylene Hybrid Composite. Journal of Engineering Research and Reports, 26 (7). pp. 300-309. ISSN 2582-2926

Olshefski, Kristopher and Collins, Addison and Coulon, Thomas and Lowe, Todd and Ng, Wing (2022) Development of an anisokinetic particle sampling probe for use in a gas turbine engine compressor. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Paul, Niloy Kanti and Saha, Dipanwita and Biswas, Kaushik and Akter, Samia and Islam, Rifat Tasnia and Bhuyan, Muhibul Haque (2023) Smart Trash Collection System – An IoT and Microcontroller-Based Scheme. Journal of Engineering Research and Reports, 24 (11). pp. 1-13. ISSN 2582-2926

Pronk, Maarten and Eleveld, Marieke and Ledoux, Hugo (2024) Assessing Vertical Accuracy and Spatial Coverage of ICESat-2 and GEDI Spaceborne Lidar for Creating Global Terrain Models. Remote Sensing, 16 (13). p. 2259. ISSN 2072-4292

Reuben, N. Okparanma and Solomon, E. Ukpenevi and Josiah, M. Ayotamuno (2018) Analytic network process in petroleum hydrocarbon decontamination management in Nigeria. Journal of Engineering and Technology Research, 10 (4). pp. 26-37. ISSN 2006-9790

Rios, Oriol and Valero, Mario Miguel and Pastor, Elsa and Planas, Eulàlia (2019) A Data-Driven Fire Spread Simulator: Validation in Vall-llobrega's Fire. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Rodriguez, Rennier and Gomez, Frederick Ray and Graycochea Jr., Edwin (2021) Die Placement Advancement for Prevention of Silhouetted Die Occurrence on LGA Package. Journal of Engineering Research and Reports, 20 (2). pp. 113-117. ISSN 2582-2926

Romero, Pedro A. and Mayrhofer, Leonhard and Stoyanov, Pantcho and Merz, Rolf and Kopnarski, Michael and Dienwiebel, Martin and Moseler, Michael (2019) Atomistic Insights Into Lubricated Tungsten/Diamond Sliding Contacts. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Shi, Jingyuan and Li, Qiuna and Liu, Wei (2021) Research on the Energy-Saving Design Path of Rural Farmhouses under the Background of Ecological Livability. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Sun, Yun and Yang, Qiuwei and Peng, Xi (2022) Structural Damage Assessment Using Multiple-Stage Dynamic Flexibility Analysis. Aerospace, 9 (6). p. 295. ISSN 2226-4310

Suresh Babu, S. K. and Jackuline Moni, D. and Gracia, D. and Adigo, Amsalu Gosu and Chelladurai, Samson Jerold Samuel (2021) Investigation on V2O5 Thin Films for Field Effect Transistor Applications. Advances in Materials Science and Engineering, 2021. pp. 1-7. ISSN 1687-8434

Tabassum, Tasfia and Alam, Md. Mahbubul and Ejaz, Md. Sabbir and Hasan, Mohammad Kamrul (2023) A Review on Malicious URLs Detection Using Machine Learning Methods. Journal of Engineering Research and Reports, 25 (12). pp. 76-88. ISSN 2582-2926

Talledo, Jefferson (2021) Mechanical Modeling Study on the Impact of Pick-and-Place Design on Die Attach Voids. Journal of Engineering Research and Reports, 20 (2). pp. 107-112. ISSN 2582-2926

Talledo, Jefferson (2021) Stress Modeling Study on Package Crack Due to Debris. Journal of Engineering Research and Reports, 20 (2). pp. 118-124. ISSN 2582-2926

Talledo, Jefferson (2021) Understanding Package Delamination through Package Deformation Modeling at Different Thermal Conditions. Journal of Engineering Research and Reports, 20 (2). pp. 142-148. ISSN 2582-2926

Tang, Jiwei and Xie, Weicheng and Wang, Xiaoliang and Chen, Cheng (2022) Simulation and Analysis of Fluid–Solid–Thermal Unidirectional Coupling of Near-Space Airship. Aerospace, 9 (8). p. 439. ISSN 2226-4310

Vincent, Philip (2023) A Comparative Study on Suitability of AHP and TOPSIS for Identifying optimal Conceptual Design of Bearing Puller. Journal of Engineering Research and Reports, 25 (12). pp. 194-205. ISSN 2582-2926

Wang, Zhuang and Pan, Weijun and Li, Hui and Wang, Xuan and Zuo, Qinghai (2022) Review of Deep Reinforcement Learning Approaches for Conflict Resolution in Air Traffic Control. Aerospace, 9 (6). p. 294. ISSN 2226-4310

Wei, Chunhua and Zuo, Chenglin and Liao, Xianhui and Li, Guoshuai and Jiao, Lingrui and Peng, Di and Liang, Lei (2022) Simultaneous Pressure and Displacement Measurement on Helicopter Rotor Blades Using a Binocular Stereophotogrammetry PSP System. Aerospace, 9 (6). p. 292. ISSN 2226-4310

Wei, Xianggeng and Feng, Yiming and Ye, Jinying and Li, Na and Haidn, Oskar J. (2022) Influence of Mass Flow Rate on the Atomization Characteristics of Screw Conveyor Swirl Injectors. Aerospace, 9 (6). p. 293. ISSN 2226-4310

Wentao, Zheng (2024) Overview of the Development and Current Status of Pumped Storage Power Plants. Journal of Engineering Research and Reports, 26 (8). pp. 362-371. ISSN 2582-2926

Yang, Yicheng and Mi, Zhaoguo and Zhang, Wencan and Chang, Jiaqi and Liu, Yongjun and Zhong, Bintao and Yang, Weihua (2022) Experimental Study on the Effect of Rubbing Mode on Radial Crack Initiation in Labyrinth Seal Fins of Shrouded Turbine Blade. Aerospace, 9 (8). p. 441. ISSN 2226-4310

Zhou, Wenxiang and Lu, Sangwei and Huang, Jinquan and Pan, Muxuan and Chen, Zhongguang (2022) A Novel Data-Driven-Based Component Map Generation Method for Transient Aero-Engine Performance Adaptation. Aerospace, 9 (8). p. 442. ISSN 2226-4310

Čoga, Lucija and Simič, Rok and Geue, Thomas and Kalin, Mitjan (2019) Additive Adsorption on DLC Coatings in Static and Tribological Conditions Using Neutron Reflectometry. Frontiers in Mechanical Engineering, 5. ISSN 2297-3079

Book Section

Abbasi, Maryam and Saeed, Fatima and Rafique, Uzaira (2020) Preparation of Silver Nanoparticles from Synthetic and Natural Sources: Remediation Model for PAHs. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 1-10. ISBN 978-93-90516-95-7

Belkacem, Bendjaima (2023) Development of Vibrations Indicators for Rotating Machines Monitoring: Case of Gas Turbines. In: Techniques and Innovation in Engineering Research Vol. 9. B P International, pp. 25-40. ISBN 978-81-19102-65-5

G. Swaminathan, G. x and Kumar, S. D. and Mathivanan, A. (2021) Recent Advancements on Design and Development of Multi Drop Auto-Walk. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 50-58. ISBN 978-93-90768-21-9

George, Sunilaa and Thenmozhi, R. and Magudeswaran, P. N. (2023) Corrosion Performance of Steel Embedded in Activated Fly Ash Concrete. In: Techniques and Innovation in Engineering Research Vol. 9. B P International (a part of SCIENCEDOMAIN International), pp. 51-61. ISBN 978-81-19102-65-5

Gour, Abhay Singh (2023) Optimal R-SFCL Location in Power Grid. In: Techniques and Innovation in Engineering Research Vol. 9. B P International, pp. 41-50. ISBN 978-81-19102-65-5

J. O., Jeje (2024) Preparation and Analysis of a Synthetic Polymer Coagulant for the Treatment of Surface Water by Chemical Purification Process. In: Theory and Applications of Engineering Research Vol. 8. B P International, pp. 136-144. ISBN 978-81-971580-4-9

Khan, Mohammad and Zhao, Nan and Xu, Tianhao (2020) Advanced Study: Numerical Assessment on Fin Design Parameters Employed for Augmentation of Natural Convection and Fluid Flow in a Horizontal Latent Heat Thermal Energy Storage Unit. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 20-40. ISBN 978-93-90516-95-7

Kharusi, Al Sult Al and Kaithari, Dinesh Keloth and Bhambare, Parimal S. (2021) Advanced Study on Electrically Operated Multipurpose Trolley. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 104-113. ISBN 978-93-90768-21-9

Kim, Tai-Jin (2021) Transmission of Avian Influenza Virus by Humpback Whale and Its Stranding along the Atlantic Coast with CO2 Emissions. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 59-81. ISBN 978-93-90768-21-9

Lebelo, Ramoshweu Solomon (2021) Recent Study on Heat Transfer Analysis for a Sphere of Combustible Material of Variable Thermal Conductivity. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 82-91. ISBN 978-93-90768-21-9

Mondal, Puspen (2021) Cross-Sectional TEM Specimen Preparation for W/B4C Multilayer Sample Using FIB: A Recent Study. In: New Approaches in Engineering Research Vol. 8. B P International, pp. 96-100. ISBN 978-93-91473-64-8

Nimje, Jyoti J. and Wayal, A. S. (2020) Assessment and Determination of Ground Water Quality Index in Coastal Area of Mumbai. In: Recent Developments in Engineering Research Vol. 10. B P International, pp. 11-19. ISBN 978-93-90516-95-7

Ogundapo, Olusegun (2024) The Influence of Handling Stress on Transmission Line Parameters of Copper Twisted Pair Cables. In: Theory and Applications of Engineering Research Vol. 8. B P International, pp. 177-192. ISBN 978-81-971580-4-9

Rahaman, Sabina and Sumathi, M. S. and Jagannatha, K. B. and Gowda, K. V. Balvanth (2023) Numerical Simulation of CTS/CdS Thin-Film Solar Cell. In: Techniques and Innovation in Engineering Research Vol. 9. B P International, pp. 62-70. ISBN 978-81-19102-65-5

Raju, A. Bala and Rao, A. Padma and Chiranjeevi, P. (2023) Design and Analysis of Finned a Brake Drum by Using FEA – Truck: A Detailed Approach. In: Techniques and Innovation in Engineering Research Vol. 9. B P International, pp. 11-24. ISBN 978-81-19102-65-5

Reddy, M. Ramana (2021) The Design of a Static CMOS 16 Bit High Speed and Low Power Consumption Hybrid Adder Circuit Using Brent Kung Adder: A Recent Study. In: New Approaches in Engineering Research Vol. 8. B P International, pp. 101-122. ISBN 978-93-91473-64-8

Reddy, T. Srinivas (2020) Technical Investigation, Analysis and cDNA Microarray Image Segmentation Based on Hough Circle Transform. In: Recent Developments in Engineering Research Vol. 1. B P International. ISBN 978-93-90149-19-3

Rodríguez-Martínez, Juan M. and Rossello, Eduardo A. and López, Arquímedes Cruz and León, Lilia E. Arriaga-Díaz de and Bermúdez-Cerda, Javier Eugenio (2020) Relationship between Shallow Seismicity and Fluid Exploitation in the Northern Burgos Basin (Nuevo León, México). In: Recent Developments in Engineering Research Vol. 1. B P International. ISBN 978-93-90149-19-3

Saxena, Shashi and Sharma, Anupama (2021) Analyzing Energy-Saving Measures and Key Metrics for Enhancing Cooling Performance in Atrium Buildings. In: New Approaches in Engineering Research Vol. 8. B P International, pp. 133-145. ISBN 978-93-91473-64-8

Shahruddin, M. N. and Lim, C. C. and Ng, S. K. and Mahamud, K. M. S. Ku and Uzir, M. H. (2021) Recent Implementation of Malaysian National Axle Load Policies via Weight Restriction Orders 1989, 2003 and 2017. In: New Approaches in Engineering Research Vol. 8. B P International, pp. 123-132. ISBN 978-93-91473-64-8

Sugiana, A. and Aprillia, B. S. and Rifqi, M. N. (2021) Obstacles Detection at a Railroad Crossing Using the Histogram of Oriented Gradients Method and Support Vector Machine Classifier. In: New Approaches in Engineering Research Vol. 8. B P International, pp. 50-57. ISBN 978-93-91473-64-8

Sujatha, K. and Krishnakumar, R. and Ponmagal, R. S. and Jayachitra, N. and Bhavani, Nallamilli. P. G. and Lakshmi, B. Deepa and Raja, A. and Sankari, B. Rengammal and Karthikeyan, V. (2021) Impact of Green House Gases from Thermal Power Plants. In: Advanced Aspects of Engineering Research Vol. 3. B P International, pp. 92-103. ISBN 978-93-90768-21-9

Tama, Alberto and Vicente, Diego (2024) A Case Study on Carbon and Water Footprint Evaluation of 120Wp Rural Household Photovoltaic System. In: Theory and Applications of Engineering Research Vol. 8. B P International, pp. 145-176. ISBN 978-81-971580-4-9

Tandiroglu, Ahmet (2024) Reliability of Artificial Neural Network Approach for Predicting the Performance of Transient Forced Convective Heat Transfer Applications. In: Theory and Applications of Engineering Research Vol. 8. B P International, pp. 109-135. ISBN 978-81-971580-4-9

V., Priya and Kumar, M. C. Sampath (2020) Study on Basic Parameters during Anaerobic Degradation of Raw Coconut Waste. In: Recent Developments in Engineering Research Vol. 1. B P International, pp. 143-147. ISBN 978-93-90149-19-3